SKU: bigtreetech-skr-v1-4-turbo
Categories: ANNEX-ENGINEERING, BIGTREETECH, BLV, Control Unit, DIY 3D Printers, Prusa Bear Upgrade, Prusa Original, Voron 2.4, VORON Design
- We are currently not taking any orders.
ANNEX-ENGINEERING, BIGTREETECH, BLV, Control Unit, DIY 3D Printers, Prusa Bear Upgrade, Prusa Original, Voron 2.4, VORON Design
BIGTREETECH SKR v1.4 Turbo
SKR v1.4 Turbo is BIGTREETECH’s latest control board for 3D printers and CNC machines.
Carrying its predecessor’s success, SKR v1.4 Turbo quickly becomes the most famous and best selling control board in 2020.
A lot of new features are added since v1.3. It now supports WiFi communication and RGB lights.
- Item Type: Control Board
- Model Number: BIGTREETECH SKR V1.4 Turbo
- Material: 4-layer PCB
- MCU: 32-Bit ARM Cortex-M3 – NXP LPC1769FBD100
- Maximum Clock Frequency: 120 MHz
- Wifi Module: ESP-01S
- Dual Z-axis Interface
- Fan Support: 1 x CNC always on fan, 3 x Frequent fan
- Interfaces: I2C, SPI, Wifi, Closed loop drive, RGB light belt, DCDC mode power module
- Input Voltage: DC12V – DC24V
- Current: 5A – 15A
- Support Display: 2.8 “TFT, 3.5” TFT, LCD2004, LCD12864
- Support Driver: TMC2226, TMC2209, TMC2208, TMC2130, ST820, DRV8825, A4988, etc.
- Support File Format: G-code
- Recommended Software: Simplify3D, PrusaSlicer, SuperSlicer, Cura, Pronterface, Repetier-host, Makerware
- Support Firmware: Marlin2.0 , Smoothieware
- Temperature Sensor Interface: TH0, TH1, TB, 3 channel 100K NTC (thermal resistance)
- Removable Fuses
- Place of Origin: Shenzhen, China
We are BIGTREETECH authorized distributor.
Our stocks are imported directly from BIGTREETECH factory.
Don’t worry about quality. It is the original.
HKD 213.0
| Weight | 0.2 kg |
|---|
Based on 0 reviews
Only logged in customers who have purchased this product may leave a review.
Related products
-
Control Unit, Raspberry Pi, DIY 3D Printers, ANNEX-ENGINEERING, BLV, Prusa Bear Upgrade, Prusa Original, Tiny-M, VORON Design, Voron 0, Voron 2.4
Raspberry Pi 4 Model B
-
Control Unit, BIGTREETECH, DIY 3D Printers, ANNEX-ENGINEERING, BLV, Prusa Bear Upgrade, Prusa Original, VORON Design, Voron 2.4
BIGTREETECH SKR v1.4
Control Unit, BIGTREETECH, DIY 3D Printers, ANNEX-ENGINEERING, BLV, Prusa Bear Upgrade, Prusa Original, VORON Design, Voron 2.4BIGTREETECH SKR v1.4
SKR v1.4 is BIGTREETECH’s latest control board for 3D printers and CNC machines.
Carrying its predecessor’s success, SKR v1.4 quickly becomes the most famous and best selling control board in 2020.
A lot of new features are added since v1.3.
It now supports WiFi communication and RGB lights.
Unlike the SKR v1.4 Turbo, SKR v1.4 uses LPC1768 chips running at a but slower clock speed.
However, it does not lower its performance by much.
It is still a very good budget choice over the SKR v1.4 Turbo.
- Item Type: Control Board
- Model Number: BIGTREETECH SKR V1.4
- Material: 4-layer PCB
- MCU: 32-Bit ARM Cortex-M3 – NXP LPC1768FBD100
- Maximum Clock Frequency: 100 MHz
- Wifi Module: ESP-01S
- Dual Z-axis Interface
- Fan Support: 1 x CNC always on fan, 3 x Frequent fan
- Interfaces: I2C, SPI, Wifi, Closed loop drive, RGB light belt, DCDC mode power module
- Input Voltage: DC12V – DC24V
- Current: 5A – 15A
- Support Display: 2.8 “TFT, 3.5” TFT, LCD2004, LCD12864
- Support Driver: TMC2226, TMC2209, TMC2208, TMC2130, ST820, DRV8825, A4988, etc.
- Support File Format: G-code
- Recommended Software: Simplify3D, PrusaSlicer, SuperSlicer, Cura, Pronterface, Repetier-host, Makerware
- Support Firmware: Marlin2.0 , Smoothieware
- Temperature Sensor Interface: TH0, TH1, TB, 3 channel 100K NTC (thermal resistance)
- Removable Fuses
- Place of Origin: Shenzhen, China
We are BIGTREETECH authorized distributor.
Our stocks are imported directly from BIGTREETECH factory.
Don’t worry about quality. It is the original.
SKU: bigtreetech-skr-v1-4 -
Control Unit, BIGTREETECH, DIY 3D Printers, ANNEX-ENGINEERING, BLV
BIGTREETECH TMC5161 v1.0
TMC5161 is BIGTREETECH high end stepper motor driver.
It has the highest allowed voltage and current spec among all BIGTREETECH TMC drivers.
- 2 Phase stepper motor up to 3.1A RMS
- Motor Supply Voltage: 8V – 35V
- Logic Supply Voltage: 3.3 – 5V
- Rsense: 62mΩ
- SPI Mode
- Built-in MOSEFT
- StealthCrop2
- Spreadcycle
- Stallguard2
- DCStep
- CoolStep
- 256 Microstep
We are BIGTREETECH authorized distributor.
Our stocks are imported directly from BIGTREETECH factory.
Don’t worry about quality. It is the original.
SKU: bigtreetech-tmc5161-v1-0 -
Control Unit, BIGTREETECH, DIY 3D Printers, ANNEX-ENGINEERING, BLV, Prusa Bear Upgrade, Prusa Original, VORON Design, Voron 2.4
BIGTREETECH SKR v1.3
Control Unit, BIGTREETECH, DIY 3D Printers, ANNEX-ENGINEERING, BLV, Prusa Bear Upgrade, Prusa Original, VORON Design, Voron 2.4BIGTREETECH SKR v1.3
SKR v1.3 is BIGTREETECH’s most famous best selling 32-bit control board.
It achieved a huge success by providing an alternative budget choice among all 32-bit control board.
SKR v1.3 is a highly reliable and DIY-able board.
Although the v1.4 is released, SKR v1.3 is still a solid budget choice over the new v1.4.
Go for a v1.3 if you don’t need Wifi capability and RGB lights.
- Item Type: Control Board
- Model Number: BIGTREETECH SKR V1.3
- Material: 4-layer PCB
- MCU: 32-Bit ARM Cortex-M3 – NXP LPC1768FBD100
- Maximum Clock Frequency: 100 MHz
- Wifi Module: No Wifi Support
- Single Z-axis Interface
- Fan Support: 1 x CNC always on fan, 1 x Frequent fan
- Input Voltage: DC12V – DC24V
- Current: 5A – 15A
- Support Display: 2.8 “TFT, 3.5” TFT, LCD2004, LCD12864
- Support Driver: TMC2226, TMC2209, TMC2208, TMC2130, ST820, DRV8825, A4988, etc.
- Support File Format: G-code
- Recommended Software: Simplify3D, PrusaSlicer, SuperSlicer, Cura, Pronterface, Repetier-host, Makerware
- Support Firmware: Marlin2.0 , Smoothieware
- Temperature Sensor Interface: TH0, TH1, TB, 3 channel 100K NTC (thermal resistance)
- Removable Fuses
- Place of Origin: Shenzhen, China
We are BIGTREETECH authorized distributor.
Our stocks are imported directly from BIGTREETECH factory.
Don’t worry about quality. It is the original.
SKU: bigtreetech-skr-v1-3
There are no reviews yet.