- We are currently not taking any orders.
ANNEX-ENGINEERING, BLV, DIY 3D Printers, Mean Well, Power Supply Unit, SE Series
Mean Well SE-450-24
Mean Well is one of the most reliable power supply manufacturer in the industry.
It is the one and only choice when it comes to 3D printer’s power supply.
We import our Mean Well PSU from legitimate Mean Well’s distributor.
Do not cheap out such an important part as it may cause safety issue.
You need a reliable power supply. Trust only genuine parts!
USD 64.65
Based on 0 reviews
Only logged in customers who have purchased this product may leave a review.
Related products
-
Control Unit, BIGTREETECH, DIY 3D Printers, ANNEX-ENGINEERING, BLV, Prusa Bear Upgrade, Prusa Original, Tiny-M
BIGTREETECH TFT70 | TFT50 | TFT43 v3.0
Control Unit, BIGTREETECH, DIY 3D Printers, ANNEX-ENGINEERING, BLV, Prusa Bear Upgrade, Prusa Original, Tiny-MBIGTREETECH TFT70 | TFT50 | TFT43 v3.0
BIGTREETECH has gone further to create huge size TFT screens for all TOUCH Screen lovers!
Three sizes are added into the TFT family:
- TFT70 v3.0 (7-inch)
- TFT50 v3.0 (5-inch)
- TFT43 v3.0 (4.3-inch)
All of them comes with RGB color screen and dual mode.
Users can switch between TOUCH and knob control in second.
TOUCH screen firmware are at BIGTREETECH’s Github.
It is highly configurable. Users can customize the firmware and image on the screen.
Enjoy the love of a 7-inch color screen!
- Place of Origin: Shenzhen, China
We are BIGTREETECH authorized distributor.
Our stocks are imported directly from BIGTREETECH factory.
Don’t worry about quality. It is the original.
SKU: bigtreetech-tft70-tft50-tft43-v3-0 -
Control Unit, BIGTREETECH, DIY 3D Printers, ANNEX-ENGINEERING, BLV, Prusa Bear Upgrade, Prusa Original, VORON Design, Voron 2.4
BIGTREETECH SKR v1.3
Control Unit, BIGTREETECH, DIY 3D Printers, ANNEX-ENGINEERING, BLV, Prusa Bear Upgrade, Prusa Original, VORON Design, Voron 2.4BIGTREETECH SKR v1.3
SKR v1.3 is BIGTREETECH’s most famous best selling 32-bit control board.
It achieved a huge success by providing an alternative budget choice among all 32-bit control board.
SKR v1.3 is a highly reliable and DIY-able board.
Although the v1.4 is released, SKR v1.3 is still a solid budget choice over the new v1.4.
Go for a v1.3 if you don’t need Wifi capability and RGB lights.
- Item Type: Control Board
- Model Number: BIGTREETECH SKR V1.3
- Material: 4-layer PCB
- MCU: 32-Bit ARM Cortex-M3 – NXP LPC1768FBD100
- Maximum Clock Frequency: 100 MHz
- Wifi Module: No Wifi Support
- Single Z-axis Interface
- Fan Support: 1 x CNC always on fan, 1 x Frequent fan
- Input Voltage: DC12V – DC24V
- Current: 5A – 15A
- Support Display: 2.8 “TFT, 3.5” TFT, LCD2004, LCD12864
- Support Driver: TMC2226, TMC2209, TMC2208, TMC2130, ST820, DRV8825, A4988, etc.
- Support File Format: G-code
- Recommended Software: Simplify3D, PrusaSlicer, SuperSlicer, Cura, Pronterface, Repetier-host, Makerware
- Support Firmware: Marlin2.0 , Smoothieware
- Temperature Sensor Interface: TH0, TH1, TB, 3 channel 100K NTC (thermal resistance)
- Removable Fuses
- Place of Origin: Shenzhen, China
We are BIGTREETECH authorized distributor.
Our stocks are imported directly from BIGTREETECH factory.
Don’t worry about quality. It is the original.
SKU: bigtreetech-skr-v1-3 -
Control Unit, BIGTREETECH, DIY 3D Printers, ANNEX-ENGINEERING, BLV
BIGTREETECH TMC5161 v1.0
TMC5161 is BIGTREETECH high end stepper motor driver.
It has the highest allowed voltage and current spec among all BIGTREETECH TMC drivers.
- 2 Phase stepper motor up to 3.1A RMS
- Motor Supply Voltage: 8V – 35V
- Logic Supply Voltage: 3.3 – 5V
- Rsense: 62mΩ
- SPI Mode
- Built-in MOSEFT
- StealthCrop2
- Spreadcycle
- Stallguard2
- DCStep
- CoolStep
- 256 Microstep
We are BIGTREETECH authorized distributor.
Our stocks are imported directly from BIGTREETECH factory.
Don’t worry about quality. It is the original.
SKU: bigtreetech-tmc5161-v1-0 -
Control Unit, BIGTREETECH, DIY 3D Printers, ANNEX-ENGINEERING, BLV
BIGTREETECH SKR PRO v1.2
SKR PRO v1.2 is BIGTREETECH’s newest top of the line control board for 3D printers and CNC machines.
It is capable to control 6 stepper motor drivers with a maximum of 7 stepper motors as default.
It is a perfect choice for dual color machines and even tool changer.
It also comes with 32-bit ARM level Cortex-M4 series STM32F407ZGT6 chip with 168MHz high processing power.
- Item Type: Control Board
- Model Number: BIGTREETECH SKR PRO v1.2
- Material: 4-layer PCB
- MCU: 32-Bit ARM Cortex-M4 – NXP STM32F407ZGT6
- Maximum Clock Frequency: 168 MHz
- Wifi Module: ESP3D
- Dual Z-axis Interface
- 6 Stepper Motor Slots
- Fan Support: 3 x CNC fan
- Interfaces: I2C, SPI, Wifi, Closed loop drive, DCDC mode power module
- Input Voltage: DC12V – DC24V
- Current: 5A – 15A
- Support Display: 2.8 “TFT, 3.5” TFT, LCD2004, LCD12864
- Support Driver: TMC2226, TMC2209, TMC2208, TMC2130, ST820, DRV8825, A4988, etc.
- Support File Format: G-code
- Recommended Software: Simplify3D, PrusaSlicer, SuperSlicer, Cura, Pronterface, Repetier-host, Makerware
- Support Firmware: Marlin2.0 , Smoothieware
- Temperature Sensor Interface: TH0, TH1, TB, 3 channel 100K NTC (thermal resistance)
- Removable Fuses
- Place of Origin: Shenzhen, China
We are BIGTREETECH authorized distributor.
Our stocks are imported directly from BIGTREETECH factory.
Don’t worry about quality. It is the original.
SKU: bigtreetech-skr-pro-v1-2
There are no reviews yet.